For this box you will probably need a pair of
sharp craft snips to trim the twigs and the hot glue gun.
The materials for this method are both availabel on a walk or drive in
the country.
If they are not localy available for you they may also be found in some
craft shops in both the natural and artificial verisions.
The bigest draw back to the natural materials is they tend to dry out
over time making the cedar brittle and causing the pussy willow blossoms
to drop off.
With careful planning you will have a striking presentation. The soft
green backgound of cedar forms a perfect frame for the silver white pussy
willow blossoms.
Determine how many pieces of cedar and twigs of pussy willow you
will need.
Check to be sure any lose peices are sniped off before you start.
Let your hot glue gun come up to temprature.
Pick up a cedar sprig and try it for fit.
Working carefully but quickly apply a few drops of hot glue to the
bottom of the cedar sprig
Quickly press the sprig into place and hold it firm for a few seconds
whild the glue sets.
Finish the cedar before starting the pussy willows.
Glue the pussy willow twigs in place using the same method as you
did for the cedar.
When you are finished go back and check for loose pieces
Cedar and pussy willow gift box.
Remember the hot glue sets as it cools so work quickly but remember its
hot.
Always follow the manufactures recomendations when using any electrical
appliance.
Store these in a cool dark place untl the event and transport them in
a single layer.